Facebook
  • New generation Coating Nozzle gun SG-317
  • New generation Coating Nozzle gun SG-317
  • New generation Coating Nozzle gun SG-317
  • New generation Coating Nozzle gun SG-317
  • New generation Coating Nozzle gun SG-317
  • New generation Coating Nozzle gun SG-317

New generation Coating Nozzle gun SG-317

No.SG-317
A hand-held gun for the ceramic coating step: spray is drawn from a clear bottle and laid on the panel in an even, controlled pass. ABS body, 0.9 kg.
  • New generation Coating Nozzle gun SG-317
  • New generation Coating Nozzle gun SG-317
  • New generation Coating Nozzle gun SG-317

Description

Product Overview

This is the gun that applies the coating. A car comes in, gets washed, decontaminated and polished, and the last working step before it is left to cure is the one this tool is built for: liquid atomised at the nozzle and laid onto the panel in a thin, even film. That step is what professional ceramic coating work depends on, and it is why a coating bay keeps one of these within reach rather than in a cupboard.

A clear bottle sits under the barrel with a metal pickup tube running down to its base. Pulling the trigger draws product up the tube and out through the nozzle, so what leaves the gun is the liquid that was poured in. Because the bottle is transparent, the technician can watch the level fall as the panel is worked instead of shaking the tool to guess what is left.

Importers add it to a tool range next to the coatings. Detailing chains standardise on it so every technician applies product the same way. Own-brand programmes take it as a platform they can put their name on. All three are asking the same thing of their ceramic coating suppliers: a handpiece that survives daily use, a bottle that can be read at a glance, and a route to a replacement without changing tool halfway through a season.

Ceramic coating for cars is never one continuous pass. It is a bonnet, then a wing, then a door, then a bumper, with a check between each. A gun that stays light and predictable lets a technician keep the film even across those breaks, which is exactly what the customer sees when the car goes back out into daylight.

It replaces two older habits: wiping coating on with a suede block and levelling out the marks afterwards, and reaching for an aerosol can that gives no real control over flow. A refillable gun lets the technician decide how much product goes into the bottle, see it going down, and stop before a panel is over-loaded.

Handpiece & Build

  • ABS shell, aluminium alloy where it matters — the body keeps the gun light, while the metal parts take the load at the nozzle and the trigger, which is where a ceramic coating spray gun works loose after months of daily use.
  • Pistol grip and chrome trigger — the grip angle keeps the wrist close to neutral, so the nozzle stays square to the panel instead of being tilted to keep the arm comfortable.
  • Brass collar and metal nozzle fitting — the collar threads the nozzle assembly onto the barrel.
  • Brass holds its shape through repeated cleaning, but it is a thread, not a clamp:
  • snug is enough.
  • Clear bottle with an internal pickup tube — the tube reaches down into the bottle so the last of a fill still draws, and the clear wall shows how much is left without unscrewing anything.
  • The bottle hangs below the barrel, not in front of it — the weight sits under the hand rather than ahead of it, which is what keeps the nozzle angle steady at the far end of a long panel.

Coating Application Steps

  1. Prepare the panel before the gun comes out.
  2. Wash, decontaminate, polish and wipe down.
  3. Coating only looks as even as the surface underneath it, and the gun is not there to fix marring.
  4. Fill the bottle and check the pickup tube.
  5. Pour in the ceramic coating spray you are running, or another liquid of similar body, and confirm the tube reaches the bottom of the bottle so the draw stays constant as the level drops.
  6. Make two test passes where they will not be seen.
  7. A spare panel, a painted offcut or an inner edge shows how the gun lays product down at the distance and speed you work at.
  8. Change one thing at a time until the film looks even.
  9. Apply the spray on ceramic coating in overlapping passes, panel by panel.
  10. Hold the nozzle at a consistent distance from the surface and move at a steady speed, overlapping each pass on the one before it so no dry strip is left between them.
  11. Watch the film, not the bottle.
  12. Professional ceramic coating work is judged on how level the film is.
  13. If a panel starts to look wet in patches, ease off rather than adding more product on top.
  14. Check the level between panels.
  15. The clear bottle turns this into a glance rather than a job, and topping up between panels is quicker than running dry halfway along a door.
  16. Work in a fixed sequence.
  17. Roof, upper panels, lower panels, bumpers.
  18. Coating in the same order every time stops anyone leaning across a panel that has just been laid.

Use & Cleaning

Flush the gun the moment the last panel is finished. Coating starts to cure as soon as it meets air, and the inside of a nozzle is the worst place on earth for it to cure. A flush straight after the final pass takes a minute; a nozzle left overnight with product in it can take an hour of soaking to bring back.

Clean the parts that touch product separately. Take out the pickup tube and the nozzle assembly and flush them through, then wipe the barrel. A spray on ceramic coating leaves a film on everything it passes, and that film builds up exactly where the flow has to go.

Keep strong solvents off the ABS body. The shell is plastic, and aggressive thinners will dull it and can soften it. Clean the outside with a damp cloth and reserve the solvents for the metal parts and the fluid path.

Store it dry and assembled loosely. Empty the bottle, leave the collar hand-tight rather than cranked down, and rest the gun so it is not standing on its nozzle. After a run of ceramic coating for cars the temptation is to put it away wet; that is the habit that shortens a gun's working life.

The mistakes that cost the most are small ones: product left in the bottle between cars, the bottle screwed on tight with residue setting in the thread, and the brass collar over-tightened when the nozzle goes back on until the thread starts to give.

Specifications

ModelSG-317
Product nameCoating nozzle gun
Body materialABS with aluminium alloy
ColourBlack
Overall size36.9 × 22.5 × 10.8 cm
Handpiece weight0.9 kg
Fluid feedSuction-feed clear bottle with internal pickup tube
Nozzle and fittingsMetal nozzle, chrome trigger, brass collar
BrandSURAINBOW
Place of originGuangdong, China
Spray gun with clear fluid cup, model HR-10

Sample Approval & Batch Traceability

  1. Send the brief first.
  2. Tell us the item, the quantity, the destination market and whether the order is stock or own-brand, so the sample is prepared against the right version rather than a generic one.
  3. Test the sample the way your bays will use it.
  4. Check the body and finish, the trigger feel, the fit of the bottle thread, and how the gun lays down the ceramic coating products you actually intend to run through it.
  5. Seal the approved piece as the bulk reference.
  6. Once both sides agree on the version, the approved sample is identified and kept, and production is compared against it rather than against a written description.
  7. Agree the packaging proof at the same time.
  8. Artwork, label wording and carton print are reviewed and signed off before the run, so the box that arrives matches the product that was approved.
  9. Keep a batch reference with the goods.
  10. As a ceramic coating manufacturer we can keep batch records and retained samples, but a query is only traceable if the carton identifies the run — ask for that identification to be included on the order.
  11. Report a problem with the reference in hand.
  12. Batch number, quantity affected, photos and a short note on how the tool was used.
  13. That is what lets an issue be checked against the sealed sample instead of from memory.

Ordering & Delivery

  • Minimum order: 24 pieces.
  • One carton — workable as a first order for a distributor testing the line, and a sensible unit for a shop that already sells coating.
  • Carton data for planning: 24 pieces per carton, 69 × 42.5 × 54 cm, 17.8 kg gross. That is the figure a forwarder will ask for and the figure a warehouse needs before it books shelf space.
  • In stock and fast shipping.
  • Ask your sales contact to confirm the current position against the quantity you have in mind.
  • Order the coating with the gun.
  • We work as ceramic coating suppliers as well as tool suppliers, so the liquids and the equipment that applies them can be quoted together and shipped on one set of documents.
  • Top up the rest of the bay at the same time.
  • Guns, pads, towels and ceramic coating supplies are quoted per item, so a mixed order is confirmed line by line rather than as one block.
  • Branding and packaging proofing.
  • Artwork for the gun and the carton is reviewed and proofed before production; what can be carried on the product and on the box is confirmed for your project before the order is released.
  • Payment stages.
  • The deposit, the balance and when each falls due are set out on your quotation, so nothing is carried over from a previous order by assumption.
  • Documents and dispatch.
  • The export document set for your market is confirmed on the order, along with which certificates or test reports can be supplied for this item and the shipping method that suits your destination and volume.

Scale & Supply Capability

SURAINBOW is run by Guangzhou Liangdian Automotive Supplies Co., Ltd., a factory-trade operation set up in Guangzhou in 2010 and now 50 people strong. Sixteen years in car care have given us a one-stop supply position: our own SURAINBOW lines are held in stock for fast shipping, and an associate factory with modern production equipment and an established quality management system keeps replenishment moving. We take OEM and ODM work and our R&D team develops to your specification. Buyers in the Middle East, the United States, Southeast Asia, Europe, the UK, Russia, Africa and Australia already order from us.

FAQ

Do you supply the coating as well as the gun?

Yes. We are ceramic coating suppliers as well as tool suppliers, and this gun is made to be sold alongside the coatings in the same range. If you are putting together ceramic coating supplies for a bay or a resale range, the liquids and the equipment that applies them can be quoted together — tell your sales contact which coatings you plan to run so the pairing is checked before the order.

What liquids can I spray through this gun?

It is built for coating work: a ceramic coating spray from our range, spray-on sealants, and liquids that stay thin enough to be drawn up the pickup tube and atomised at the nozzle. Thick paste waxes, gritty compounds and anything that gels in the bottle are not what this gun is for. If you are unsure whether one of our ceramic coating products suits it, send the product name and we will tell you before you order.

Is this gun built for daily professional use?

It is the handpiece we supply for professional ceramic coating work, and it is put together for that pace: the parts that wear are metal, the body is a light shell rather than a frame, and the gun is designed to be flushed and put straight back into service between cars. As a ceramic coating manufacturer we also make the liquids that go through it, so the tool and the product are matched rather than bought separately and hoped to suit.

How does it compare with an aerosol can of coating?

An aerosol gives you a fixed charge, no view of what is left, and a can that goes in the bin when it is empty. A refillable gun lets a technician pour the spray on ceramic coating they already stock, watch the level in the clear bottle and set the pace of the pass. For a shop that gets through ceramic coating products regularly, it also means the product is bought in volume rather than in cans.

Can I coat a whole car with it, or is it only for small areas?

Whole cars. Ceramic coating for cars is worked panel by panel, and this gun suits that rhythm: fill the bottle, work a panel, check the level, move on. Keeping the film even across all those panels comes down to holding the distance and the speed consistent, which is far easier with a light handpiece than a heavy one.

What should I check before the first order?

Three things: that the liquids you plan to run are thin enough to draw through the pickup tube, that the gun suits the coating you have chosen, and that the version you approve is the version sealed as the reference for the run. Send the list of ceramic coating supplies and tools you are comparing and we will go through it item by item. As a ceramic coating manufacturer we can also tell you which of our coatings we would put through this gun ourselves.

Can we put our own brand on the gun and the box?

We take OEM work, and branding on both the product and its carton sits inside the packaging proofing step. Artwork, label wording and carton print are reviewed and signed off before production, and what can be carried on the tool itself is confirmed for your project at that stage.